LCD 2004 Megatronics
Hello, I'm building a Mendelmax 1.5 with Megatronics Board V3.0 and trying to get LCD 2004 running on this board. Does anyone has a wiring diagram which pins needs to be connected from the board to...
View ArticleRe: LCD 2004 Megatronics
I'll give it a shot.. Go look at the PDF : megatronicsv3.pdf on page #8, you should see the LCD part with the pins.. beside of the contrast, 5V and GND pins, you see the Dxx pins. Go to the bottom of...
View ArticleRe: LCD 2004 Megatronics
Thanks first for your fast answer; if I do exactly what you described then only comes brilliant blue screen with nothing on it although I was running serial monitor from the megatronics testsoftware....
View ArticleRe: LCD 2004 Megatronics
Did you double check your wiring ? Theres a pot on the board to change contrast.. maybe its way down.. Did you enabled everything in the firmware ? is this a single unit ? (display only with no rotary...
View ArticleRe: LCD 2004 Megatronics
Hi Rigor, To explain clearer I want to give you the steps I did by myself: 1.) I'm using the purely LCD2004 without any encoder or anything else originally from Reprepworld 2.) PIN description from...
View ArticleRe: LCD 2004 Megatronics
I do not think that there is any LCD support in the Megatronics test firmware, at least for the Megatronics 2.0 board. You need to install either Marlin or Repetier to use (or test) the LCD.....
View ArticleClik here to view.
Re: LCD 2004 Megatronics
Quotevreihen I do not think that there is any LCD support in the Megatronics test firmware, at least for the Megatronics 2.0 board. You need to install either Marlin or Repetier to use (or test) the...
View ArticleRe: LCD 2004 Megatronics
Dear Builders, after some discussions with the technical service from Reprapworld I found now the missunderstandings after everything works fine. I tried to get the following bundle running:...
View ArticleRe: LCD 20x2 Megatronics v2backlight problem
Hi every one, I'am building with an megatronics v2 lcd 20x2 and rerapworld keypad v1.1 to begin with every function is working on the keypad and lcd except I'm having a problem with my backlight of my...
View Article
